Melt & Pour Soap Bases

Creating unique solid bars has never been so easy! Artisans and large scale manufacturers use Asnova Melt & Pour bases to produce some of the most innovative and aesthetically pleasing bars on the market.

With a variety of bases available around the world, our Melt & Pour soap bases only require the addition of fragrance, essential oils or other additives to make stunning bars for all audiences.

Soap Base

FAQ

It is more convenient to use silicone molds in soap making. It’s easier to get soap out of them. But plastic molds are also quite convenient — they are transparent and thus you can see the process of fine pouring and hardening of the soap. The plastic mold becomes unusable after 60-70 pours of soap, but nothing happens to the silicone.

Bubbles can only remain on and in the soap if the base has been overheated. Heat over low heat, in a water bath, or at the lowest microwave setting in a microwave oven.

The only rule is to add fragrance at the very last stage, when the soap base is no longer very hot. This is due to the fact that the fragrance can simply evaporate when it is introduced into a very hot soap base.

Something is possible. For example: Honey, ground coffee, sugar, salt, ground oatmeal, etc. However, do not forget that the shelf life of such soap is quite short.

After you have poured the first layer of soap and it has cooled, scratch it with a toothpick and sprinkle it with alcohol, then the layers will not come apart.

Yes, you can. But you should take those ingredients that do not give color if you do not want the soap to take on a different color or shade.

This is due to the presence of a large amount of fatty acids (from oils) and very soft surfactants.

First, you need to pour a thin layer of soap base into the mold. When the base has not yet completely dried and remains warm, start twisting the roll. If the base dries completely, it will not be possible to roll the roll.